Baldwin pre-cut string

[Joe And Penny Goss]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
<G>
Joe Goss
imatunr@srvinet.com
www.mothergoosetools.com
  ----- Original Message -----=20
  From: Allan Gilreath=20
  To: 'Pianotech'=20
  Sent: Sunday, October 26, 2003 8:14 AM
  Subject: RE: Baldwin pre-cut string


  How about if we call them Vise grips instead of Vice grips?  There =
might be a difference. (Kind of like the sign on the door reading =
"ladies" instead of "laddies".) <chuckle>



  Allan

  Allan L. Gilreath, RPT



  -----Original Message-----
  From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On =
Behalf Of John Ross
  Sent: Friday, September 26, 2003 7:56 AM
  To: Pianotech
  Subject: Re: Baldwin pre-cut string



  Hi Michael,

  Mole wrenches, are called vice grips over here.

  Regards,

  John M. Ross
  Windsor, Nova Scotia, Canada
  jrpiano@win.eastlink.ca

    ----- Original Message -----=20

    From: Michael Gamble=20

    To: pianotech@ptg.org=20

    Sent: Thursday, October 23, 2003 3:39 PM

    Subject: Fw: Baldwin pre-cut string



    Hello Glen & Del

    This pre-cut string is a strange idea. I thought pianos were always =
strung up from, as Del says, spools of overhead string.

    But I'd like to add a little something a-propos the kinks or bends =
in string. I have a policy when tuning an old piano, and whenever it is =
possible, to use the old string by simply loosening off its companion, =
straightening out the old string where it had been on the hitch, and =
threading it up to the old wrest-pin and tuning up. I find that when =
doing this the tonal quality stays the same and they don't stretch like =
a replacement new string. You just land up with maybe two coils or less =
on the two wrest-pins in question. The strings eventually straighten out =
pretty well. I find using a "mole-wrench" on the hitch pin a good idea =
to hold the string in place while fiddling around with the loose end. Is =
"mole wrench" an international term? It's an adjustable gripping tool =
which can grip with incredible force if needed and is adjusted by a =
knurled knob sticking out of the end of one of the handles. Good =
description?  :-)

    Michael G (UK)

    ----- Original Message -----=20

    From: Delwin D Fandrich=20

    To: Pianotech=20

    Sent: Thursday, October 23, 2003 5:31 PM

    Subject: Re: Baldwin pre-cut string





      ----- Original Message -----=20

      From: Crashvalve@aol.com=20

      To: pianotech@ptg.org=20

      Sent: October 22, 2003 5:13 AM

      Subject: Baldwin pre-cut string



      When I visited Conway in 73' they had precut and straightened wire =
to string the verticals. I know a straighter wire gives truer harmonics, =
Question is; does zig-zag roller straightening of piano wire have any =
downside like false beats etc ? If rollers are good, did Baldwin use =
then in two or four planes ?
      regards
      Glenn C.=20



    Unless there is a kink in the wire, any wire stretched to 150+ lbs =
of tension is going to be pretty straight. With this in mind I'm not =
sure what you mean when you say "a straighter wire gives truer =
harmonics."=20



    Baldwin uses straightened and pre-cut wire simply as a manufacturing =
expediency. These wires are purchased from Mapes to specification with =
each coming bundled in a package of, perhaps, a hundred or so identical =
wires labeled for a specific spot on a specific piano. These are then =
placed in one of several tubes set up so the stringer can pull whichever =
specific wire is needed in sequence as stringing progresses.



    The grand pianos are strung from standard 5-lb coils in rack held =
above the piano.



    Del

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/49/17/9d/cc/attachment.htm

---------------------- multipart/alternative attachment--