I'll have to check on the specifics. Tho I believe the assembly was in the piano for the proceedure. Just where and how they thin to get the desired results, he didnt have time to go into, tho I will see if I can find this out. Kevin Gouldman is an American builder in Danmark and knows Uddo Steingręber fairly well, and I believe he knows very much about how the Steingręber factory does this... so I'll ask him as soon as I can get to it. Cheers RicB > Erwinspiano@aol.com wrote: > > Ric > My first post was incomplete please see other. Interesting post. > were the boards in or out of the piano/ I presumne in? If in then how > did the accomplish thinning? > Thanks--Dale > > Apprapoe freeing up the edges of the board Dale, > > One of the segements of Steingrębers lecture in Helsinki > this past > weekend was about this. He showed a few pictures of how they > go about > this at their factory and breifly discussed some of the > goals in their > proceedure. > .............................. snip > -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html http://www.hf.uib.no/grieg/personer/cv_RB.html
This PTG archive page provided courtesy of Moy Piano Service, LLC