In my short 7 years of experience, I have found at least one string with a false beat in every single piano I have tuned. I even bought a tool from Schaff to help the situation. I just rub it back and forth on the string to kind of heat it up, and the beat goes away.....sometimes. Not all the time. Rust is a factor here. Any rusted string can have false beats that will drive you up the wall as a piano tuner. The customer won't like how it sounds either. Maybe that's why she/he called in the first place. I don't think the problem is in grands anymore than it is in uprights. I say that, because the vast majority of the pianos I see are uprights and they all have strings with false beats. Most of the false beats are still there when I'm done, too. Sometimes the false beat of the outside string will kind of cancel the false beat of the center string. Yes, sometimes there are that many. Anyway, I try my best, and I use my little tool once in a while. Just my two cents. Regards, Richard -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of David Love Sent: Monday, October 06, 2003 5:39 PM To: Pianotech Subject: Re: bridge pin placement That will put a nice dent in the bridge top and only be a temporary fix at best. Better to tap down the bridge pin itself and/or secure with a pit of thin CA. David Love davidlovepianos@earthlink.net > [Original Message] > From: Michael Gamble <michael@gambles.fsnet.co.uk> > To: Pianotech <pianotech@ptg.org> > Date: 10/6/2003 5:27:52 PM > Subject: Re: bridge pin placement > > Hello Patrick, > Here's another aspect of "false" string. A single string can sound with a > beat. I have found this problem mostly in older pianos. Though I did find it > in a model D last year. The piano which particularly seems prone to this > problem is the older Bechstein grand. It is more often to be found in a > grand than in an upright. My solution has always been to take a screw-driver > and to place the business end ON the string right at the bridge-pin. Then > witrh the heel of the hand to sharply hit the end of the handle thus > ensuring the string is seated firmly and making contact with the wood of the > bridge. I am 90% > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC