On 27-nov-03, at 17:09, David M. Porritt wrote: > OK, I know I'll get flamed by some but I have a brand new flame suit > so I'm safe. > > > > Where can I find some good glue for hammers? I'm tired of using hot > hide glue. It's fussy! If you use it straight it jells before you > get the hammer in its final position. If you use to much additive it > is weak. It gets moldy between uses. I still get loose hammer heads > even when doing it right. As far as I can tell none of the current > factories use hide glue for hammers and I don't find loose hammer > heads on them. I know Andre has some glue listed on his web site, but > it's not available here. > > > > Suggestions? > > Look at our web site www.grandpiano.nl André > > dave > > > __________________________________________ > > David M. Porritt, RPT > > Meadows School of the Arts > > Southern Methodist University > > Dallas, TX 75275 > > > > > > friendly greetings from antares the Netherlands www.concertpianoservice.nl www.grandpiano.nl
This PTG archive page provided courtesy of Moy Piano Service, LLC