This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment List, Looked at the above piano a customer has in his refinishing shop. The = plate in mortised into the rim like some squares. Someone told him to = drill a million holes down through the inside of the rim and saw the = inner rim out to remove the plate, that doesn't seem right to me, seems = that would make fitting a new board more difficult. For those who have = dealt with this in the past, can the stretcher be removed and the rim = pushed apart slightly with a jack or whatever and the plate slid = forward? Or knock the rim apart completely? Or am I the nutty one... Mike Mike McCoy RPT Chapters 170 & 190 PTG Langhorne, Pa mailto:mjmccoy@usa.com ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d4/f5/95/c5/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC