---------------------- multipart/alternative attachment In a message dated 5/21/03 9:42:28 AM Central Daylight Time, tune4u@earthlink.net writes: > Questions: > > 1) This is just a simple system with a threaded shaft holding the prop > rail, one nut under it and the round prop nut above it. How can I keep that > lower nut from moving, short of gluing it to the screw? > If the two are tightened together, they should hold. That is the way it was designed. > 2) Not having a replacement shaft (has Brambach-style knuckle), how would > y'all go about fixing this head? Would like to avoid the "sewing thread > splint with giant blob of epoxy" fix that I've seen in other pianos! > > Alan Barnard > Salem, MO > Actually, for this kind of piano, a glob of super glue is an acceptable repair on this, ev> en without the sweing thread. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/8d/33/bf/10/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC