---------------------- multipart/alternative attachment In a message dated 5/10/03 7:59:52 AM Pacific Daylight Time, kpiano@goldrush.com writes: > Just a little to much key dip. The jack is slapping the let off rail a bit > hard. Maybe the glue on the felt there was over done. Did the clacking > start when you took out the lost motion? Sure sign you have to much dip. > Keith Roberts > Keith, This just got me thinking. If anything, the dip is too shallow. The key height does not seem right to me, either: it's too low, if I were to judge just by looking at it. I got so focused on the action, I neglected the keys. I'm wondering if maybe certain keys are hitting the keyslip. It sure sounded like whippen/hammer assembly noise, but noises do tend to get tossed around in there, don't they? Thanks to everyone for their suggestions. I'll let you know what it was when I figure it out! Dave Stahl ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0a/47/c8/be/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC