---------------------- multipart/alternative attachment Terry,you can un-screw the top portion of a metal pen.I use a Cross pen.Put it over the top of the hitch-pin to tap strings down.To lift strings up,you can use a small screw driver placed on top of a small voicing block to push them up.But at tension this can be hard to do.It is much easier to set down bearing with the strings high on the pin ,tapping them down. George Fiore S. Jersey Chapter ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/97/ab/ae/c9/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC