Same problem on my 1982 U-1. A piece off the upper corner did the trick. --Cy Shuster-- Rochester, MN "Experience is what you get right after you need it." ----- Original Message ----- From: "Clyde Hollinger" <cedel@supernet.com> To: "Pianotech" <pianotech@ptg.org> Sent: Wednesday, July 30, 2003 3:03 PM Subject: Re: Pianobuilder Proverb > Terry, > > Yeah, that's what they say. The situation I found today wasn't major and wasn't my fault, but it was a > first for me. I was installing a Piano Saver system in a 1977 Yamaha console. When I came to install > the fill tube, I found that the kneeboard came to within 1/4" of the keybed, which is not enough > clearance for the tube! Has anyone run into this before? I'm sure someone has, but it was a first-time > for me.
This PTG archive page provided courtesy of Moy Piano Service, LLC