Hi Joe, You have probably mentioned it before, but I missed it. What does DAMHIK, stand for ? Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "Joseph Garrett" <joegarrett@earthlink.net> To: <pianotech@ptg.org> Sent: Thursday, July 17, 2003 12:18 PM Subject: Pin Puller/David Love's Dilemma > David, > Here's a scan of the tool. What you don't see is about 10"-12" of shaft that > the "slider" (The blue thingee), travels on. I hope this helps. This sucker > has enough force to yank out the "spring pins", (vertical hitch pins, aka > spring pins), out of a Charles Walter Grand!!!!!! DAMHIK!!!!<G> > Best Regards, > Joe Garrett, RPT, (Oregon) > > Been There, Didn't Like It, So I'm Here To Stay! [G} > ---------------------------------------------------------------------------- ---- > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC