I have a set of punches like these I bought from American Piano Supply about 15 years ago. Norman Barrett ----- Original Message ----- From: "Carl Meyer" <cmpiano@comcast.net> To: <files@ptg.org> Sent: Monday, June 30, 2003 9:56 PM Subject: Re: outbreak of war - piano plates > > ----- Original Message ----- > From: "Farrell" <mfarrel2@tampabay.rr.com> > To: "Pianotech" <pianotech@ptg.org> > Sent: Monday, June 30, 2003 3:10 AM > Subject: Re: outbreak of war - piano plates > > > > What type of a "punch" would you use for such a task? I guess I'm just > > not > very punch-knowledgeable. > > > Here's a picture of a set of punchs I found many years ago. Probably > from > the estate of a player tech. No brand name anywhere. Can't find them > on > the net either. Maybe from England???? The spring loaded center marks > the > spot for the smaller punch for the hole in the washer. > > This attachment is for pianotech. > > Carl Meyer Ptg assoc > Santa Clara, Ca. > > [Photo at:] > > https://www.moypiano.com/ptg/files/attachments/84/0a/6c/1b/punches.jpg > > [Alternate URL:] > > http://tinyurl.com/fp78 >
This PTG archive page provided courtesy of Moy Piano Service, LLC