Ron, No such good luck. But thanks for the plug. It was a little harder but took no lube of any kind. Only a phillips tip and my hands. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Saturday, January 25, 2003 10:10 PM Subject: Re: Tuning problems under capo bar > > >No one responded to my desperate cry for help with Pearl River uprights O:( > >Well here is what I found. > >The previous techs ( not PTG ) answer was to > >address the slugishness by graphiting the ballance rail bushings. > >Well he did no harm but did not fix the problen > >I will tell you it took 2 minutes to remedy each piano. > >Now take a guess <G> > >Joe Goss > > > Hi Joe, > You probably GJ'd something. Possibly front rail pins. At least that has to > been a common problem with Baldwin - so maybe with Pearls too. > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC