Come on Terry. Have you EVER seen an action bracket made out of wood? That was built later than 1880? Keith R ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, January 24, 2003 3:41 AM Subject: Re: Jacob Doll action brackets > Gordon might have the right idea, but you might get a stronger unit if you epoxy-laminate some hard maple together and cut them out of that on a band saw. I guess you could also take a hunk of Delignite pinblock material and cut them out of that. I shouldn't think if too difficult to do. > > Terry Farrell >
This PTG archive page provided courtesy of Moy Piano Service, LLC