This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment It is a Kawia UST-8C, The piano is fine exept for one side which has = come loose. The side is made of partical board. My main concern was what = kind of glue to use. The rest of the stuture is fine. The side easily = goes back into its place .Thanks for all your help. =20 Jack =20 ----- Original Message -----=20 From: Tom Driscoll=20 To: 'Pianotech'=20 Sent: Monday, January 20, 2003 7:37 PM Subject: RE: Piano Side -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On = Behalf Of jack Sent: Monday, January 20, 2003 7:53 PM To: pianotech@ptg.org Subject: Piano Side I am currently working on a Kawai. It is a school piano that the kids = dropped off the stage. The piano is fine, except for the side. The glue = has come undone. Question, Do I insert glue and clamp or do I take the = whole side off and clean off old glue and reglue? Also what kind of glue do I use? Thanks Jack =20 Not enough info! What joint? How bad, what model, how = old and how the piano can be fine if the side has come loose. Not trying to be flippant, but you'll get more help with a = little more effort and the courtesy of a last name. Sincerely=20 Tom Driscoll ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f1/49/9a/03/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC