Hi Terry, Lot's of them out there. Un Hitch the helper springs, Weight off at 70gms bass to 65gms treble. Helper springs should only support about 15gms. Make sure you address the friction issues, before starting. Lube knuckles with Teflon. If you get to do this, also tail the hammers correctly, and square the back checks. If you take the stack off, don't be surprised if you find weights behind the balance rail pin. I'm giving a number of classes this year on this very subject, at Regional and the National conventions. Check the conventions near you. <G> Regards Roger. At 10:34 PM 1/20/2003 -0500, you wrote: >I tuned a Samick grand SG-161 apparently with no key leads. I didn't take >the action apart, but you can lift the keys kinda half way to see how many >leads in each key, and I could not find even one key lead. Is this possible? > >Terry Farrell > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC