Hi, Paul, I noticed your comment about the keytop scratching on the dremel table. From a list member ( I forget the name ) I got the idea of covering the table - or probably a thin layer of wood placed on the table top - with felt. This then allows one to slide the keytop around while trimming the edge on dremel or router. I thought it was a good idea. Sincerely, Tom Dickson >From: "Paul McCloud" <pmc333@earthlink.net> >Reply-To: pmc333@earthlink.net, Pianotech <pianotech@ptg.org> >To: "'Pianotech'" <pianotech@ptg.org> >Subject: RE: Keytops >Date: Mon, 20 Jan 2003 07:33:00 -0800 > >I made a jig for routing keytops with a Dremel. It worked for the >excess along the long edges, but doing the notches was hairy. I used a >rabbeting bit and a very small bearing (which I purchased at a >industrial supply house). I think that a spiral bit is recommended by >Spurlock for use on a router, but the rabbeting bit I used is straight. >The bit had a pilot with a 1/8" diameter, and the cutting edges were (I >think) about 3/8" diameter. The bearing was a slip fit over the pilot, >so I used some locktite to glue the two together. I no longer use the >jig, but the Dremel router table works well with the trimming bit. >Beware: the keytop may get scratched, since you have to slide the >keystick upside down over the table for trimming. >I've since abandoned the Dremel idea, and purchased a small 1" belt >sander. > Paul McCloud > San Diego > >-----Original Message----- >From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On >Behalf Of David Renaud >Sent: Sunday, January 19, 2003 9:55 PM >To: pianotech@ptg.org >Subject: Keytops > >Anyone have a pic. of a jig for >router down key thickness on a dremel router table. >Got dremel toys over Christmas..... > >Thinking a couple rails, >something that grabs the key to keep it level >and slides between the guide rails. Add stop block. > >Anyone have something they like >and want to post a pic/diagram or description. > > Cheers > Dave Renaud > > > >______________________________________________________________________ >Post your free ad now! http://personals.yahoo.ca >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives _________________________________________________________________ MSN 8: advanced junk mail protection and 2 months FREE*. http://join.msn.com/?page=features/junkmail
This PTG archive page provided courtesy of Moy Piano Service, LLC