---------------------- multipart/alternative attachment Hi David, Quite easy really, change some lines on a drawing, send for a trial order, and just like magic the balance rail holes change position. (Grin) Once we have settled on what is needed, we will give more details. Roger At 07:16 AM 1/7/2003 -0800, you wrote: >Thanks Roger: > >How are you going about changing the ratio? > >David Love >----- Original Message ----- >From: <mailto:roger.j@sasktel.net>Roger Jolly >To: <mailto:pianotech@ptg.org>Pianotech >Sent: January 06, 2003 11:57 PM >Subject: Re: Knabe/Samick > > >Hi David, > Knabe grands have a laminated maple rim, Renner action, > Italian Ciresa sound board, Canadian Bolduc pin block. Renner blue > hammers. Mapes bass strings. They are regulated and voiced in California. >I'm currently working on changing some of the action ratios to further >improved performance. >Dip is currently at 11.2mm and is being changed to 10mm. >Very positive response from pianist thus far. Detailing is the best that >I have seen from Korea thus far and will get better. >6ft 4" is reverse engineered from late 20's scale. Will be introduced at NAMM. >But I may be the wrong person to ask. > >Roger >Tech consultant. >Samick Corp > > >At 11:15 PM 1/5/2003 -0800, you wrote: >>Has anyone had a chance to look at the new Knabe pianos made by >>Samick? Opinions? >> >>David Love ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/13/1e/fc/5d/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC