----- Original Message ----- From: "Ron Overs" <sec@overspianos.com.au> To: <pmc333@earthlink.net>; "Pianotech" <pianotech@ptg.org> Sent: Monday, December 30, 2002 2:33 PM Subject: RE: Clear poly repair The scraper must be very sharp to allow for the original poly' to be scraped away without disturbing the bonding of the finish with the veneer at the bottom of the scraped region. If the veneer/poly joint line is damaged an unsightly ring will become visible after the pour. Ron Have you ever tried to seal the damaged area with CA to prevent the bleeding under the finish? Have you ever tried CA instead of poly to repair a clear finish? Thanks to you and all others for your replies. Paul Chick
This PTG archive page provided courtesy of Moy Piano Service, LLC