Knabe Grand/Plugs

[Joseph Garrett]

Terry,
You be wrong! As I DO NOT use epoxy for this project, it don't make a darned
bit of difference if the over-laps are "....in the center of the tuning pin
hole"! The over-lapping makes for a more homogenous unit, IMHO. The drilling
"pattern" is more difficult to accomplish and more time consuming, but I've
had really good success with this system. <G>
Best Regards for the New Year,
Joe Garrett, RPT, (Oregon)

Been There, Didn't Like It, So I'm Here To Stay! [G}