I would be interested too. Keith Roberts kpiano@goldrush.com ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Friday, February 28, 2003 7:57 AM Subject: Re: Drying pinblock before stringing > > >Which is probably why it usually takes years to be further damaged enough by > >EMC changes and pin forces to be noticed? > > I expect. Take another look at the data Mike McCoy posted Mar 8 2000 on a > chapter project to see what happens to torque ranges in different pinblock > materials with 2/0 pins in different hole diameters, over time. It's very > interesting. I have it in an Excel spreadsheet for a little easier viewing > if anyone's interested. > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC