Drying pinblock before stringing

[Ken Jankura]

That was one of our chapter technicals a few years back. It's probably time
to take another reading. Mikey, you out there?
Ken Jankura

----- Original Message -----
From: "Ron Nossaman" <RNossaman@cox.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: Friday, February 28, 2003 10:57 AM
Subject: Re: Drying pinblock before stringing


>
> >Which is probably why it usually takes years to be further damaged enough
by
> >EMC changes and pin forces to be noticed?
>
> I expect. Take another look at the data Mike McCoy posted Mar 8 2000 on a
> chapter project to see what happens to torque ranges in different pinblock
> materials with 2/0 pins in different hole diameters, over time. It's very
> interesting. I have it in an Excel spreadsheet for a little easier viewing
> if anyone's interested.
>
> Ron N
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>