In a message dated 27/02/03 8:16:28 AM, Christus4@aol.com writes: << If anyone has an idea of how much time might be involved with the actual job of moving the guide rail 2mm or so to the left and then regulating the dampers again from scratch, I'd appreciate it. >> Chuck...... Just lossen the screws and pry the guide rail over with a second (padded) screwdriver. This should give you your 2mm and not require any aditional damper regulation. Just to be sure ...check each damper wire with a handheld slow release before walking away. :-) Jim Bryant (FL)
This PTG archive page provided courtesy of Moy Piano Service, LLC