Since I'm not doing rebuilding I will sell my Genesis Jig. It's like new. Contact private email. Rich ----- Original Message ----- From: "Dave Davis" <davistunes@yahoo.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, February 25, 2003 7:06 PM Subject: Re: "Genesis Jig?" > Hi Dave, > I bought the Genesis Jig from Randy. It works fine > and I'm not sorry I bought it. It's good to practice > on some "junk" keys, like out of a piano you're > throwing away, before working on a customer's keys, > there is a slight learning curve to making it work > well. The most efficient way that I've found is to set > it up, do all the A's, then the B's, C's, etc. > > The fault I've found is that it should be a couple of > inches longer...in order to get enough of the keystick > routed for the new top, the end has to almost stick > out of the jig, making a precarious situation for the > router on the edge of the jig. > > It's also designed to rout off the fronts, but the > guys I know who do keytops sand them off (sometimes in > flames) with a belt sander. > > If you have a bunch of junk keys, you might try > building your own jig and experimenting to find > something cheaper that works as well. > > Have fun!! > > Dave Davis > Renton, WA > Assoc. PTG > > > > --- Dave Smith <dsmith941@hotmail.com> wrote: > > I would really appreciate hearing from anyone who > > has experience with or knowledge of the so-called > > Genesis Jig which Randy Potter course mentions for > > routing keytops. I realize that many technicians > > send their keys out for keytop replacement, but I am > > at the point of making the decision to tool up and > > try to learn, or send out. > > > > Thanks! Reply to list or privately if you would > > rather. > > > > Dave Smith > > SW FL > > ----- Original Message ----- > > From: J Patrick Draine > > To: Pianotech > > Sent: Tuesday, February 25, 2003 6:30 PM > > Subject: Re: Stretch: What's it all about? > > > > > > > > On Tuesday, February 25, 2003, at 11:39 AM, D. B. > > Stang wrote: > > > > > > Any guidance on this subject is welcome. > > > > > > Have you read PTG's (authored by Michael Travis) > > "PACE Tuning Lesson Plans" (v. 1 & 2) and "On Pitch" > > by Rick Baldassin? If not, buy them now (order from > > the PTG Home Office or at your neighborhood PTG > > Regional Conference). > > > > Patrick Draine > > > > > > > __________________________________________________ > Do you Yahoo!? > Yahoo! Tax Center - forms, calculators, tips, more > http://taxes.yahoo.com/ > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC