FWIW, I have used the Diamond. I bought them BECAUSE they were more expensive (the standard theory being that I will screw up enough, might as well use the best materials - that might make up for some of my work). Not knowing which pins where like what, I was just hoping they were a little bit better in some way. I found that they varied in diameter over a few thousandths - so you need to mic them. I wonder if the threads are any different - as advertised - and somehow grip the wood better, or feel better, or the finish is better. Maybe they are better balanced for all you high-speed tuners! Terry Farrell ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Wednesday, February 26, 2003 12:00 AM Subject: Tuning pin choice > I see Terry didn't get much feedback. Is there anyone out there who has > used both Denro and Diamond, and has comparison information? > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC