This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Humm=20 The Jahn heads that I am aware of use a 10 to 1 mm thread while the = theads we use use a tapered pipe thread ( 1/8" standard thread ). This = would not be a good match, Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Richard Brekne=20 To: Pianotech=20 Sent: Wednesday, February 19, 2003 2:20 PM Subject: Re: Tuning levers =20 Dave Bunch wrote:=20 For those who own the Yamaha lever....=20 Is it an extension or stationary design?=20 =20 Stationary.=20 Do the threads accept Schaff heads? If not, does Yamaha carry a = variety of=20 lengths and angles? Dont know.. but I can buy Jahn heads that fit.=20 =20 Dave Bunch=20 (Thinking of changing my name to something really cool, like Jack = Flange!=20 :-)=20 =20 =20 Cheers=20 RicB=20 --=20 Richard Brekne=20 RPT, N.P.T.F.=20 UiB, Bergen, Norway=20 mailto:rbrekne@broadpark.no=20 http://home.broadpark.no/~rbrekne/ricmain.html=20 =20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/05/ca/28/c3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC