Are you talking front rail or balance rail? Keith R ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, February 16, 2003 10:06 AM Subject: Re: Sizing front rail pin holes > > >What are some suggestions for sizing loose front rail pin holes. I've done > >the hide glue solution and thought there might be a better way. > > > >Thanks. > > > >Donn Young, RPT > > I've used Titebond before installing, a narrow strip of veneer at either > the front or back of the hole, and/or CA after installation. All work. > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC