Thickness Planer

[Greg Newell]

---------------------- multipart/mixed attachment
I don't know how feasible this would be but you could attach the piece you 
want to plane piggy back style to a straight flat piece with double sided 
tape. Run them through together and then separate and you should have what 
you want.

Greg


At 09:30 PM 2/15/2003, you wrote:

>Ron Nossaman stated that he thickness planes hard maple to 1.5 to 2 mm 
>thick laminations. I have a 12-1/2 inch DeWald thickness planer, but it 
>seems the thinnest it will plane down to is about 1/8 inch, or about 3 mm. 
>What planer goes down to 1.5 mm. Or are modifications possible to 
>accomplish this?
>
>Terry Farrell
>
>_______________________________________________
>pianotech list info: https://www.moypiano.com/resources/#archives

Greg Newell
mailto:gnewell@ameritech.net 

---------------------- multipart/mixed attachment--