Just had that the other day-the clunck. It's from the back part of the piano disk damper lever. The top of it is a very hard leather material. I put a very thin piece of key bushing cloth-just 1 1/2 inch square-between the touch point and no more clunck. On Wed, 05 Feb 2003 19:54:48 -0500 Phil Bondi <tito@philbondi.com> writes: > > Does this mean the pedal travel is too long or that it stops with a > sharp > > clunk? > > Hi Dave..it stops with a sharp clunk. She, and I, want the pedal to > travel a > liiiiitle bit further. > > > Is the PianoDisc trap lever above the pedal rod hitting the bed or > the > stop > > bolt? > > The Pedal rod COULD be hitting the bed..I didn't pull the rail > covers off. > > Do I get 10 Demerits for not doing that? > > woops, > > -Phil Bondi (Fl.) > phil@philbondi.com > > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > Bill Schlipf Bloomington, IL ________________________________________________________________ Sign Up for Juno Platinum Internet Access Today Only $9.95 per month! Visit www.juno.com
This PTG archive page provided courtesy of Moy Piano Service, LLC