CA vs epoxy, was Re: loose bridge pins

[Paul Chick (EarthLink)]

----- Original Message -----
From: "Charles Neuman" <piano@charlesneuman.net>
To: <pianotech@ptg.org>
Sent: Monday, February 03, 2003 11:32 AM
Subject: CA vs epoxy, was Re: loose bridge pins


> For people who have used both CA glue and epoxy for loose bridge pins (or
> other applications), do you have a preference?
>
> Charles Neuman
> PTG Assoc, Long Island

Charles
It depends on the size of the gap to be filled and any cracks adjacent to
the pins.  Epoxy is my choice for gaps and cracks; heat it with a heat
gun-even a hair dryer-and it flows like thin CA.

Paul Chick