This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Dave Bunch Sent: Friday, August 22, 2003 9:59 PM To: pianotech@ptg.org Subject: Big Bushings Is there a supplier out ther that carries plate bushings with an outside diameter of greater than 7/16"? This size, which is the largest in Schaff's catalog, just floats in the plate holes of my current rebuild and then breaks if a pin is driven through it. Suppose I could pin without them but would rather not. Dave Bunch [Paul Chick (Earthlink)] Dave Contact me privately regarding the oversize bushings. Paul Chick ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/06/d9/e9/7f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC