For bending upright hammer shanks. How do you solve the problem of a slightly bent shank? Terry Farrell ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, April 28, 2003 1:29 PM Subject: Re: Electric Hammer Shank Bending Pliers > > >I thought I had seen electric hammer shank bending pliers - basically an > >electrified version of the pliers on page 49 of the Schaff catalog. Anyone > >know where I can find electric ones? Or should I just solder one wire to > >each end of the pliers and plug it into the wall? ;-) > > > >Terry Farrell > > > How about the ones on page 49, just below the #268? The #121 ones that say > "This is the same plier as No. 268 above, except it is electrified." > > Now the next question... why? > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC