-----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of gordon stelter Sent: Monday, April 14, 2003 1:19 PM To: Pianotech Subject: Re: Killer Octave Question No! It makes no sense! I leave it to you to build a bridge that is kerfed on the underside, bent to fit the board and then filled with epoxy! Thump! Gordon, Read the thread! The bridge will conform to the crown of the board according to our esteemed rebuilders. Why kerf and epoxy an already pliable component. Your propensity to find the most convoluted solutions to problems that don't exist really are amusing. Tom Driscoll
This PTG archive page provided courtesy of Moy Piano Service, LLC