---------------------- multipart/alternative attachment In a message dated 9/29/02 6:19:31 PM !!!First Boot!!!, jonpage@attbi.com writes: > I travel new shanks before hanging the hammers because if you hang the > hammer straight and then have to shim a travelling shank, > the hammer is not longer straight. Then you will either have to remove the > hammer and reglue or burn-in if slightly off. > > Regards, > > Jon Page, > I have done it both ways, and found that hanging them first, and then traveling, even with burning them afterwards, was much more successful. Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/9c/37/6a/f2/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC