----- Original Message ----- From: "gordon stelter" <lclgcnp@yahoo.com> To: <oleg-i@wanadoo.fr>; "Pianotech" <pianotech@ptg.org> Sent: Saturday, September 28, 2002 7:05 PM Subject: RE: Fallboard letters > I'd use an automotive polishing compound of the proper > finess. It will have enough abrasive to brighten the > brass, but without he harsh chemicals of brass polish. > De : pianotech-bounces@ptg.org > > [mailto:pianotech-bounces@ptg.org]De la > > part de Jack Houweling > > Envoyé : samedi 28 septembre 2002 19:17 > > À : Pianotech > > Objet : Fallboard letters > > > > > > I would like to know how to polish inlayed letters > > on fallboards? I assume > > they are brass. How do you polish without affecting > > the polyester? Can they > > be coated with lacquer to prevent futher tarnishing? > > > > Thanks Jack > Jack I haved use Macguiars (spelling) Cleaner Wax to remove the tarnish on the brass lettering of Kawais and Yamahas and never have a problem with the poly finish. It is a liquid wax available at Walmart, Shopko, Target, or auto supply dealers. Paul Chick
This PTG archive page provided courtesy of Moy Piano Service, LLC