This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ---------------------- multipart/alternative attachment Thanks, Kevin, for taking the time for those measurements. If Samick has a slow trigger finger, or forgets to take the safety off, I'll hunt down bolts of these specs. Mark Potter bases-loaded@juno.com On Sat, 14 Sep 2002 09:56:27 -0700 "Kevin E. Ramsey" <ramsey@extremezone.com> writes: That would probably be best, I'm sure Samick has them. In the meantime, if you want to try to find some, I measured some of the ones I think you were referring to yesterday. They have a 1.0 metric thread and measure .230 thickness. Would that be in the area of 5.75mm? Something like that. ----- Original Message ----- From: bases-loaded@juno.com To: pianotech@ptg.org Sent: Friday, September 13, 2002 7:33 PM Subject: Re: [pianotech] leg bolts for Horugel grand Thanks to all for the suggestions re: finding replacements for the missing leg bolts. It appears that Samick has what I need, so I will try that route first... the path of least resistance. Of course, if what Conrad says is true, "That the shortest distance between two points is under construction", then it may take awhile. Or if they send the bolts by Conastoga wagon.... I appreciate the replies. Mark Potter bases-loaded@juno.com _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2b/09/07/0d/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC