---------------------- multipart/alternative attachment In a message dated 9/7/2002 7:09:15 PM Pacific Daylight Time, gnewell@ameritech.net writes: > Subj:Re: pulley keys - special tool from oliag (wood washers) > Date:9/7/2002 7:09:15 PM Pacific Daylight Time > From:<A HREF="mailto:gnewell@ameritech.net">gnewell@ameritech.net</A> > Reply-to:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > To:<A HREF="mailto:pianotech@ptg.org">pianotech@ptg.org</A> > Sent from the Internet > > > Hi Greg > But why would you want to move the pin for or aft unless you plan on > moving the balance rail. Otherwise the front of the key would bind or have > a huge gaposis at the key slip. Just my thought. > Dale Erwin > > Newton, > Again, I beg your indulgence this once more. Does this system > (Onesti's) put back the pin hole exactly where it was before or do you have > > the option to, say, center it more in the key stick or even move or fore or > > aft if so desired? > > Greg Newell > ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f2/82/f5/33/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC