New Steinway D problem

[Richard Brekne]

---------------------- multipart/alternative attachment
jolly roger wrote:

> Hi Ric,
>              It's a tension bar, help prevent the two
> struts pulling apart.  The beams under the board also have
> tension struts.  That's those thinner slats that go cross
> ways.
> Regards Roger
>
>

Thanks Roger... btw... what is the proper and most correct
name for the "bell" that couples the rim to the plate up in
the treble section ?

And thanks all you others for the good words of advice and
caution.

Cheers

--
Richard Brekne
RPT, N.P.T.F.
UiB, Bergen, Norway
mailto:rbrekne@broadpark.no
http://home.broadpark.no/~rbrekne/ricmain.html


---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2b/c3/91/d6/attachment.htm

---------------------- multipart/alternative attachment--