I've only tuned one Betsy Ross spinet. That was enough. I think you have the right technique but the wrong tool. I'm thinking 'chain saw' Alan Barnard P.S. Same tool recommended for Stark spinets. ----- Original Message ----- From: <Tvak@AOL.COM> To: <pianotech@ptg.org> Sent: Friday, September 06, 2002 7:51 AM Subject: Hedges and Pianos (OT) > I was cutting the hedge yesterday and I noticed that as I moved the hedge > trimmer across the top of the hedge it left some stragglers and I had to do a > second pass. (Much like a piano that needed a pitch raise!) Then I noticed > that the second pass was much more efficient if I did it in the opposite > direction, which would eliminate almost all the stragglers. > > Then the light bulb went off over my head...if it works on the hedge, maybe > it would work on a piano, too! > > Maybe I should go in one direction for the first pass (from A0 to C8) and > then go the opposite direction on the second pass! > > So I think I'll try it. Next time I come across a Betsy Ross spinet that's > 150 cents flat, I'll take the hedge trimmer and move from left to right, and > then go in the opposite direction for my second pass. > > I'll bet when I'm done, that piano would never have sounded better. > > Tom Sivak > > P.S. > > This is my first OT post. Forgive me. I don't know what got into me.
This PTG archive page provided courtesy of Moy Piano Service, LLC