I would like to hear more about this statement, as my experience in the field has been exactly the opposite. Holes did get larger as wood dries out. and I can mention it happening in many instances, I use a drying chamber for many of my jobs because of that. examples. When I pick up pianos for repair from very humid places. after I had them several days in my shop All action screws loosen up, they need tightening Tuning pins feel looser, after the piano is back in place, you can feel the difference after a few days and I observed the same pattern with the key pins So, I would like to hear an explanation to this statement. ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: <pianotech@ptg.org> Sent: Friday, September 06, 2002 07:23 Subject: Re: removing key pins > "Holes in wood get smaller as humidity goes down..." > > I have heard this before. Believe me, I am not trying to start an arguement - just trying to understand. If a hole gets smaller, then why do tuning pins get more loose with lower humidity? > > Terry Farrell > > ----- Original Message ----- > From: "Don" <pianotuna@accesscomm.ca> > To: <pianotech@ptg.org> > Sent: Thursday, September 05, 2002 10:51 AM > Subject: Re: removing key pins > > > > Hi Keith, > > > > Holes in wood get smaller as humidity goes down, unless there are > > contraints of some kind that don't allow the wood to shrink. > > > SNIP. > > > > Regards, > > Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. > > > > mailto:pianotuna@accesscomm.ca > > > > http://us.geocities.com/drpt1948/ > > > > 3004 Grant Rd. > > REGINA, SK > > S4S 5G7 > > 306-352-3620 or 1-888-29t-uner > >
This PTG archive page provided courtesy of Moy Piano Service, LLC