D. chaser add-in plugs

[Don]

Hi Terry,

Yes any short three outlet cord will work--but you can also "tilt" the
humidistat so that one end is located close to the sound board. Are you
using bottom covers yet? There are some outlet adapters that don't stick
out above the stat as well, or you can use two of them plugged in to give
you the necessary clearance.

At 08:49 PM 9/5/02 -0700, you wrote:
>I'm installing THREE dehumid bars w/stat on a fully restored Henry Miller 9' 
>grand, circa 1895, tomorrow, and inadvertently forgot to order the add-in 
>plugs. I talked with D.Chaser this morning and they told me i could use an 
>ordinary 3 outlet adapter, but the probelm is that it sticks out the top of 
>the stat, not allowing the proper positioning next to the soundbard. What I 
>forgot to ask them is if a standard extension cord, albeit a short one, 
>would suffice. I would assume so, as long as it's UL approved and can handle 
>the combined wattage, which is just over 100 wts. Thoughts? Thanks!
>
>Terry Peterson
>
>
>_________________________________________________________________
>Join the world’s largest e-mail service with MSN Hotmail. 
>http://www.hotmail.com
>
>
>

Regards,
Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.

mailto:pianotuna@accesscomm.ca

http://us.geocities.com/drpt1948/

3004 Grant Rd.
REGINA, SK
S4S 5G7
306-352-3620 or 1-888-29t-uner