This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment A fourth answer is to replace the sharps with thicker tops. Tony Caught caute@optusnet.com.au ----- Original Message -----=20 From: Wimblees@AOL.COM=20 To: pianotech@ptg.org=20 Sent: Friday, September 06, 2002 2:17 AM Subject: Re: speaking of front rail bushings I've gotten three answers to think about. 1. replace the keytops. 2. = cut the punchings. 3. replace the punching with smaller ones.=20 What to do, what to do?=20 I'll let you know later what I've decided.=20 Thanks=20 Wim=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f0/e9/30/e5/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC