This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment You can glue size the holes with a CA clue like I might have to do after = I remove the front rail pins with my right angle drill.=20 Keith R ----- Original Message -----=20 From: Isaac OLEG=20 To: pianotech@ptg.org=20 Sent: Thursday, September 05, 2002 1:09 AM Subject: RE: key pin polish Hello, Change them, it is easy and not very long, the new chrome at the base = will add some holding for the worn keys. The touch will be much smoother with new pins always I seal the wood with some heavy lacquer, hoping the pins will stay in = place at the balance rail (I've seen some pulling out after a few years. What other method can be used ? Isaac OLEG -----Message d'origine----- De : owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]De la = part de jolly roger Envoy=E9 : jeudi 5 septembre 2002 08:58 =C0 : pianotech@ptg.org Objet : Re: key pin polish Hi Kieth, If they are rusty and pitted, just replace them, it's = just as fast as cleaning them up. New pins are cheap. Roger At 09:26 PM 9/4/02 -0700, you wrote: Has anybody tried turtle wax chrome polish and rust remover on the = pins? I just did the balance rail with it and wow was it fast. I figured = it had properties like tarn-x. They sure are shiny and about as smooth = as anything else I've used. It's suppose to seal and protect the chrome. = Is it wax? or memorax? Keith R ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4d/da/94/d0/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC