If it's brand new, call the factory. Usually they are more than willing to help with any technical help. Here is their home page link. http://www.schimmel-piano.com/e/home.html Keith R ----- Original Message ----- From: "Avery Todd" <avery@ev1.net> To: <pianotech@ptg.org> Sent: Wednesday, September 04, 2002 6:18 PM Subject: Schimmel Upright question > List, > > Does anyone have any experience with Schimmel uprights? I received this from > one of my outside customers and will be going to check it out in the next > day or so. Here's a part of the e-mail: > > >Dace bought a replacement, a Schimmel vertical, from the Piano Store on > >Westheimer. Unfortunately, I > >don't remember the model number, but the piano listed for approximately > >$13,000. While trying out the > >piano in the store, Dace noticed that the touch was just a tiny bit heavy > >and asked if it could be adjusted > >if he decided to buy the instrument. He was assured by the salesperson > >that the action could indeed be > >adjusted. > > > >However, after Dace bought the piano, he was referred by the Piano Store > >to Sharp and Flat Tuning, and > >this piano technician (I don't remember his name) told Dace that there was > >nothing that could be done to > >adjust the action on this Schimmel. Dace has since called the Piano > >Store, and the salesperson there > >now says that he mentioned nothing about the action and that he or the > >Piano Store cannot help in any way. > > Now why doesn't this surprise me from a "typical" dealer? > > My initial thoughts are tight bushings and/or tight balance rail holes or > dampers that are lifting too soon, causing that "heaviness". Or possibly > friction in the pinning. > > Any other ideas before I go look at it? I've never dealt with a Schimmel > upright before but I can't believe that a piano with that reputation can't > have that particular problem solved relatively easily! Am I wrong? Thanks > for any help. > > Avery > >
This PTG archive page provided courtesy of Moy Piano Service, LLC