Broadwood Rectangular Tuning tip

Lance Lafargue lancelafargue@bellsouth.net
Mon, 2 Sep 2002 20:52:17 -0500


Hey Dave, That's why I'm investigating this.  I suspect my ordered tool
won't fit well.  I have contacted a couple of suppliers abroad.
P.S.  The guy with the right tool (you) is too busy to take these people.
I'll let you know what I find. Thanks.
Lance Lafargue, RPT
Mandeville, LA
New Orleans Chapter, PTG
lancelafargue@bellsouth.net
985.72P.IANO
-----Original Message-----
From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf
Of Dave Doremus
Sent: Friday, August 30, 2002 9:58 PM
To: pianotech@ptg.org
Subject: RE: Broadwood Rectangular Tuning tip


Lance, the tip from Schaff, if anything like the ones I've seen, will
be way too big. The old Hales were fine, you might ask and see if
they have any left from when APSCO got Tuners. Otherwise get a
t-hammer from Fletcher and Newman. Or get a machinist to make you a
double headed oval tip, sized to fit the pins......or just call the
guy with the right tools  <grin>.



This PTG archive page provided courtesy of Moy Piano Service, LLC