Hey Joe, Know of a supplier anywhere handling these? Lance Lafargue, RPT Mandeville, LA New Orleans Chapter, PTG lancelafargue@bellsouth.net 985.72P.IANO -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of Joseph Garrett Sent: Friday, August 30, 2002 8:59 PM To: pianotech@ptg.org Subject: Broadwood Rectangular Tuning Tip Lance et al, The correct tuning hammer tip, for this type of work, is a double headed one. It should have an "oval" tip on each head and these tips should be 90degrees from the other. If you want to see one of these, I will be more than happy to crank up my scanner and send a scan to you Best Regards, Joe Garrett, RPT, (Oregon) Been There, Didn't Like It, So I'm Here To Stay! [G}
This PTG archive page provided courtesy of Moy Piano Service, LLC