Sorry, Jason, but the "Capo Bar" is the solid bar cast into the plate which provides the forward string speaking length termination point, and downbearing for the bridges ( as oppsed to the agaffes lower down the scale ) I believe you are referring to the duplex (or triplex) bars. --- Jason Kanter <jkanter@rollingball.com> wrote: > Greetings, list. I have met a Yamaha C-series grand > that I will be tuning next week. Took the ETD > "voice-print", played it, and examined the action. > > This piano has a cap d'astro bar in both the treble > and tenor sections. Owner complains that sometimes > the piano has a "ring" that sounds almost like a > telephone. I checked the tuning of the capo and they > are all way off. The highest section, where the capo > section is equal to the speaking section and > therefore should be a unison, is off by more trhan a > semitone. There is no place in the whole capo that > is in tune. And there is muting string-braid-felt > that has been inserted to quiet the lowest 7-8 notes > of the capo (about c4 to g4). > > My question to you is: what's the current best > practice regarding tuning of the capo? Do you > routinely check and adjust? Can I just take a hammer > and screwdriver and tap it forward/back until it is > in tune, and then tune the piano? Or is it necessary > to lower string tension first? Or should I use a > different tool such as a hammer shank to tap the > bar? > > And next question: should I remove the muting felt > from the c4-g4 area of the capo? > > Inquiring minds want to know. > > Thanks in advance > > > || ||| || ||| || ||| || ||| || ||| || ||| || ||| || > ||| > jason kanter * piano tuning * piano teaching > bellevue, wa * 425 562 4127 * cell 425 831 1561 > orcas island * 360 376 2799 > || ||| || ||| || ||| || ||| || ||| || ||| || ||| || > ||| > > > __________________________________________________ Do You Yahoo!? Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC