Delwin D Fandrich wrote: > ----- Original Message ----- > > > > > > > Well, assuming wood reacts basically the same (but opposite) when tensed > > thus, I > > would imagine you'd put the panel under about 1.5 to 2 % internal tension. > > Nope. You didn't read the manuals did you? Check out what the Wood Handbook > has to say about wood under tension. Especially under tension across-grain. Ok... I obviously got my reading cut out for me this Christmas. Grin... I KNEW I was gonna get busted on that last post :) I have the manual on disk so... a read'n I will go. Cheers RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC