----- Original Message ----- From: "Phillip Ford" <fordpiano@earthlink.net> To: "Pianotech" <pianotech@ptg.org> Sent: November 24, 2002 6:46 AM Subject: Compreg Panels (was Re: Piano Construction Origins) > > > > > > The Baldwin pinblock making process is closely > > related to the Compreg > > process with somewhat lower pressures and > > temperatures resulting in a > > slightly less dense fiber-reinforced plastic. > > > > Regards, > > > > Del > > > > Was this stuff ever tried for rims? > > Phil F Not that I have ever heard about. It would have to be a rather formidable press. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC