2 questions on tuning pins

JIMRPT@aol.com JIMRPT@aol.com
Wed, 20 Nov 2002 12:29:25 EST



<< Would like to know the best drill (size)for removing tuning pins?. >>

Jack;
 I use a 1/2 inch Milwaukee Hole Shooter. This is a 5.6 amp reversible, 
variable speed(0-850 rpm) and has the accessory handle as has been mentioned 
before.
 It is a rather heavy thingee and using it will be good for your golf grip! 
:-)
If you intend to do much restringing it certainly should be on your shop 
shelf, or one of equal power/capacity. There is no "smell" associated with 
its use but as Joe has mentioned it will twist your wrist if you are not 
paying attention to what you are doing. No better investment could be made 
for a restringer in my opinion.
Jim Bryant (FL)

This PTG archive page provided courtesy of Moy Piano Service, LLC