Hi Dave, You can make the repair spring work that mounts on the flange screw. it is a little hard but if it is only a few the spring's foot dcan be attached then bent to work the ? damper or hammer butt. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Dave Doremus" <algiers_piano@bellsouth.net> To: <pianotech@ptg.org> Sent: Friday, November 15, 2002 8:01 PM Subject: Kimball damper flanges > Alright, another quest for an odd part. Anybody have a source for the > brass damper flanges with the spring built in for an old Kimball > upright? As usual, the piano itself would be quite workable if these > were replaced and the owner is a very nice guy with very little cash > for a new instrument. Why do these always happen to me? > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC